★ Suitable for extruding of submersible/float aquatic feed , pet feed, ornamental fish feed and so on. The pellet size is about Φ1.5-16MM.
★ Flat-bottomed scraper mechanism and feeder controlled by transducer make sure that the materials can be fed evenly and constantly.
★ The DDC conditioner can make the materials have fully gelatinization of starch, which is brought about by a combination of hot steam and mechanical shear/mixing. The materials may remain in the conditioner for a time over 180S.
★ All of the parts which are directly in contact with the materials are made of stainless steel.
★ Screw sleeve adopts jacket construction, which can be injected in with hot steam or cooling water; thus the extruding temperature can be controlled effectively. Also the steam and water can be directly injected into the extruding chamber through special mechanism.
★ Removable cutting mechanism use knives with good elasticity, which attach to the die plate tenderly and can be regulated in six directions, can be operated quickly and simply. The transducer-controlled rate regulator can easily control the pellet size of the products.
★ Main bearing box structure adopts special technical design, with SKF bearing inside.
★ Variably configurations of screw bolts can match the producing demands for different formulas and raw materials.
★ Screw bolts and dies are processed through vacuum quench treatment, also be processed with high processing precision and have a long using longevity.
★ All the operating parts like steam valves etc. adopt the humanization design, in order to facilitate actual operations.
Electric cabinet equipped.
| Model | YSEX100-30 | YSEX135-55 | YSEX165-110 | YSEX165-160 |
| Capacity(t/h) | 0.25-0.4 | 0.6-1.1 | 1.2-2.5 | 2.0-4.0 |
| Power/(kw) Main Motor+Discharge+Feeder+ Conditioner+Knives+Water Pump |
30+0.75+0.37+3 +1.5+1.1 |
55+1.5+0.37+3 +3+1.1 |
110+1.5+0.75+11 +4+1.1 |
160+1.5+0.75+11 +4+1.1 |
